Get a Quote English
Ivanos
Get a Quote
Timing Belts

News & Blog

[Get a Technical Quote]

News Center

Your project's success is determined long before the first piece of metal is cut. Our pre-sales support is designed to mitigate risks, optimize performance, and ensure the components you order are perfectly aligned with your application needs.

Conveyor System Components: What Actually Drives the Line

September 05, 2026

Conveyor System Components: What Actually Drives the Line

A component-by-component breakdown of what drives a conveyor — rollers, sprockets, timing belts, gears, Poly-V pulleys — and the failure mode each one causes when mis-specified.

Chain Driven vs Belt Driven Roller Conveyor Explained

September 03, 2026

Chain Driven vs Belt Driven Roller Conveyor Explained

CDLR vs BDLR compared at the hardware level — sprocket-per-roller versus pressure belt — covering load ceiling, noise, accumulation and maintenance cost.

Conveyor Chain Sprockets: Selection, Wear and Tooth Count

September 02, 2026

Conveyor Chain Sprockets: Selection, Wear and Tooth Count

How conveyor sprocket tooth count, bore type and hardening affect chain life — with a step-by-step wear check and a bore/hub/plate comparison.

Roller Chain Sprockets: Pitch, Bore and Standards Guide

August 28, 2026

Roller Chain Sprockets: Pitch, Bore and Standards Guide

How ANSI/ASME B29.1, ISO 606 and DIN 8187 designations map to sprocket pitch, bore and hub type, with a pitch-to-application table and multi-strand selection guidance.

Aluminum Timing Pulleys: Alloys, Anodizing, Bore Specs

August 27, 2026

Aluminum Timing Pulleys: Alloys, Anodizing, Bore Specs

Compare 6061 and 7075 aluminum timing pulleys, clear versus hard anodizing, and H6/H7 bore tolerances — with the dimensional growth and masking details catalogue pages leave out.

How to Choose a Custom Gear Manufacturer: OEM Checklist

August 26, 2026

How to Choose a Custom Gear Manufacturer: OEM Checklist

A buyer-side checklist for evaluating custom gear manufacturers — how to verify a claimed accuracy grade, question heat-treatment control, check inspection evidence, and structure an RFQ that gets comparable quotes.

Poly-V Pulleys: PH to PM Profiles, Materials and Sizing

August 21, 2026

Poly-V Pulleys: PH to PM Profiles, Materials and Sizing

Profile-by-profile reference for PH, PJ, PK, PL and PM Poly-V pulleys — rib pitch, groove angle, materials, taper-lock versus solid bore mounting, and what ISO 9982 does and does not specify.

Custom Timing Pulleys: How to Specify and Source Them

August 20, 2026

Custom Timing Pulleys: How to Specify and Source Them

A step-by-step RFQ walkthrough for custom timing pulleys — profile, tooth count, flanges, hub, bore tolerance, material, surface treatment and drawing format, in the order a quoting engineer needs them.

Open-Ended vs Endless Timing Belts: How to Choose

August 19, 2026

Open-Ended vs Endless Timing Belts: How to Choose

Open-ended vs endless timing belts compared by joining method, tensile cord, and linear vs rotational duty — with the pitch ranges, materials, and failure modes that decide the specification.

Copyright © 2025 Qingdao lvanos Transmission Machinery Co., Ltd All Rights Reserved.Powered By Haiyunhui

Sitemap | Privacy Agreement

Get a Quote

    We will reply you within 24 hours. If for urgent case, please add WhatsApp/WeChat: +86 13625428257,Or call +86 0532-55560029  directly.

    *We respect your confidentiality and all information are protected.

    We will only use your information to respond to your inquiry and will never send unsolicited emails or promotional messages.